Introduction To The Application Process Of The Weaving Machine

Net looms are now more and more widely used, especially metal wire mesh is now basically processed and produced by net looms, which brings convenience to the development of textile, fishery and other industries, and helps people complete many tasks that were previously relied on A function that is performed manually.

Today, let's take a look at the operation steps of the loom and the points to pay attention to.

First of all, we first place the adjusted beam on the rear support frame of the weaving machine, open the wire that has been bundled, start from one side of the wire of the beam, open the wire of the bundled shaft, and The wire passes through the warping equipment of the loom, then vertically passes through the roller of the loom, and is fixed on the loom, repeating until all the wires are fixed, then fix the wire on the winding spring shaft, and turn on the power , when the metal wire is wound to a fixed length, turn off the power, take off the spring wire and use it as a weft wire, put the spring wire into the wire storage tube as a weft wire, and weave it into a net together with the warp wire, and fix both the weft wire and the warp wire After that, turn on the power, so that the net can be automatically woven.

During the entire production process of the net loom, it is necessary to pay attention to whether the warp of the net loom has broken ends and whether the weft is in place before turning on the power. When turning on the power, pay attention to whether there is water on the hands. Lubrication, lubricating once every 2 hours on average, the loom has a self-stop system, the staff should guard their jobs, and they should check and deal with them in time when there is a fault.