Yangzhou Xinyu Textile Machinery Co., Ltd

Call Us:

E-mail: HHH2004LLL@126.com

enLanguage

Daily Repair Method Of Fishing Net Machine

Fishing net machine is a machine for catching and producing fishing nets. More generally, fishing net machine is a mechanized tool used for producing fishing nets, anti-bird nets, sports nets and other nets. Compared with the traditional manual net weaving method, it is greatly improved. In addition to labor productivity and product quality, it has had a huge impact on the development of my country's fishing net industry.


So what do we do when something goes wrong?

(1) Failure of mechanical parts and mechanical obstruction

The loss of the working ability of the machine is called obstruction, and the loss of the working ability of the machine part is called failure. Mechanical interference and component failure are inseparable. Obstacles caused by parts failure due to normal wear or physical and chemical changes of parts of fishing nets, such as parts failure, such obstacles are also called natural obstacles.


(2) Elimination (repair) essentials of mechanical obstruction

The elimination of tension against man-made turbulent obstacles is achieved by improving the quality of utilization, management and maintenance personnel and strengthening the sense of responsibility. For natural obstacles, it can only be achieved through the methods of mediation and repair. Usually, there are the following methods:

1. The essentials of patching up the common nature of tension and recovery

(1) Mediation Law

Usually, the original joint relationship of the common parts is restored by adjusting the bolt tightness or adjusting the thickness of the gasket. When repairing, it is not necessary to process the common parts (or only scrape and grind), but only increase the gasket or adjust the thickness of the gasket. The way to restore it to the original common gap.

(2) Patch size method

When patching, the more expensive parts in the common piece are machined to restore their shape, and a new size is obtained at the same time, and then the worn part of another fishing net machine in the common piece is discarded and replaced with a new and processed part For the same parts, the common gap of the common parts is restored to the initial gap, such as repairing the shaft and replacing the bearing bush, repairing the cylinder liner and replacing the piston, etc. This kind of repair method needs to consider the possibility of processing the parts and the mechanical strength allowed after the parts are repaired. On this premise, the number of repairs should be increased; on the other hand, in order to facilitate the provision of spare parts, the repair size should be adjusted. change.

(3) Supplementary parts method (additional parts method)

1. In this method, a flexible shape is added to each part of the common part, and a reasonable diameter reduction or reaming is given to one of the parts, and then a bushing of the same material or higher quality is added to it. It is pressed or screwed into the original part with interference or welded to the original part, and then processed to the same size, so that the common properties meet the requirements.


2. Patching essentials for recovering both common properties and the shape and size of parts

(1) Welding repair method

Metal welding is to use the diffusion and connection between atoms to firmly combine the evacuated metal weldments into a group. According to the difference in welding configuration, welding includes gas welding and electric welding, etc. Most of the broken and worn parts are repaired and surfacing. For repairs, some fishing net machine parts are turned and ground after welding to achieve the desired shape and size.

(2) Re-casting method

After the babbitt alloy of the sliding bearing is worn to the limit, the process of removing the slag alloy and re-casting the new babbitt alloy is called the re-casting method. With this method, the performance scale of the old sliding bearing can be completely restored.

(3) Electroplating (brush plating, electroplating) method

Electroplating is the process of using direct current to generate an electrochemical response when the electrolyte is resolved to realize the deposition of metal on the surface of the plated part.

(4) Spraying and spray welding

Spraying is to spray the molten material particles with high-speed airflow on the surface of the prepared rough parts to form a relatively strong mechanical joint layer. The spray welding process is basically developed from the spraying process. It re-melts the sprayed layer and obtains a coating with similar surfacing performance on the surface of the part.

(5) Bonding and bonding method

Bonding is a repair process that uses the chemical, physical and rigid forces between the adhesive and the parts of the fishing net to bond the parts or repair the cracks, holes, wear and other defects of the parts.


knotless fishing net making machine

You Might Also Like

Send Inquiry